BXYDJ - CAMCO QUIK STAIN & QUIK STAIN II
- MSDS: BXYDJ
- Manufacturer: N P
- Product Name: CAMCO QUIK STAIN & QUIK STAIN II
- National Stock Number: 6505-00-764-4729
Product Identification
Contractor
Cage: 1AD19
Ingredients
METHYL ALCOHOL
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 85-90%
ACGIH TLV: 200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO HEALTH HAZARDS ARE EXPECTED OR
REPORTED WHEN USED AS DIRECTED BY MEDICAL LABORATORIES IN SMALL
VOLUMES; LEVEL OF EXPOSURE IS USUALLY VERY SMALL. PLEASE READ
FURTHER INFORMATION CONCERNING SIGN OF E XPOSURE AND FIRST AID
INSTRUCTIONS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION-PROLONGED OVEREXPOSURE CAUSES
DIZZINESS, HEADACHE, NARCOTIC EFFECTS. SKIN-OVEREXPOSURE CAUSES
EXCESSIVE DRYNESS AND MAY CAUSE DERMATITIS. EYES-CAUSES CORNEAL
DAMAGE. CAUSES BLINDNESS AND RE NAL DISFUNCTION. INGESTION-MAY BE
FATAL.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA.
First Aid
First Aid:SKIN-WASH OFF WITH SOAP AND WATER, APPLY EMOLLIENT CREAM.
EYES-IRRIGATE WITH WATER OR EYEWASH FOR 15 MINUTES, GET MEDICAL
ATTENTION IMMEDIATELY. INGESTION-GET MEDICAL ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point:54.0F,12.2C; CC
Accidental Release
Spill Release Procedures:ABSORB WITH A SUITABLE COMMERCIAL ABSORBENT.
IN CASE ABSORBENT IS NOT AVAILABLE OR THERE IS A POSSIBLE FIRE
HAZARD, WASH DIRECTLY TO SEWER WITH COLD WATER. CLEAN AREA WELL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STOARE AT ROOM TEMPERATURE BETWEEN
50-90 IN CLOSED CONTAINERS AWAY FROM ANY SOURCES OF HEAT OR OPEN
FLAMES.
Other Precautions:AVOID BODILY CONTACT. REMOVE CONTAMINATED CLOTHING
AND WASH AND TREAT EFFECTED AREAS OF THE BODY. DO NOT USE THIS
PRODUCT NEAR OPEN FLAMES.
Exposure Controls
Respiratory Protection:NIOSH APPROVED DISPOSABLE DUST AND MIST
RESPIRATOR.
Ventilation:LOCAL EXHAUST (MINIMUM RATE).
Protective Gloves:THIN POLYETHYLENE.
Eye Protection:CHEMICAL GOGGLES.
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:EYEWASH SHOULD BE AVAILABLE AT WORKPLACE. DO
NOT CONTAMINATE FOODSTUFF WITH THIS PRODUCT.
Supplemental Safety and Health
FLAMMABLE AND TOXIC.
Chemical Properties
HCC:F5
Stability
Hazardous Decomposition Products:NONE EXPECTED.
Disposal
Product ID:CAMCO QUIK STAIN & QUIK STAIN II
MSDS Date:01/01/1987
FSC:6505
NIIN:00-764-4729
MSDS Number: BXYDJ
Waste Disposal Methods:OBSOLETE MATERIAL MAY BE INCINERATED OR RETURNED
TO MANUFACTURER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.